Garage Door Opener Installation Cost in 2026: Chain, Belt, Screw and Wall-Mount Prices
Garage door opener installation costs $218 to $540 with the opener included, and the average is $379 (Angi, Aug 3, 2026). HomeGuide's range is $300 to $900. Labor alone runs $150 to $400, and Home Depot lists installation from $178 when you buy the opener there. Wall-mount jackshaft openers cost the most.
A new garage door opener costs $218 to $540 installed for most homeowners, averaging $379 (Angi, updated Aug 3, 2026). HomeGuide's range runs higher at $300 to $900, averaging $600 (Jul 10, 2025), with the unit itself $150 to $500 and labor $150 to $400. The drive type sets most of the gap: chain drives are the cheapest units and wall-mount jackshaft openers the most expensive.
Replacing an existing opener is the quick, cheap version of the job: the outlet, header bracket, and sensors are already there, and HomeGuide says most companies include removing the old unit in the labor. A first-time install can need wiring run to the ceiling, which HomeGuide puts at $10 to $25 per linear foot. Smart features, battery backup, and an extension kit for a tall door are the add-ons that move the total.
Not sure what size opener you need? The opener HP selector at the top of this page estimates your door's weight from its size and construction and recommends a horsepower and drive type. Garage Door Repair Network is a referral service: we pass your request to independent local installers who quote the exact unit and job. The ranges below are national figures from Angi, HomeGuide, and The Home Depot, each with its date.
Typical national range
$218 – $540
Angi (Aug 3, 2026): $218–$540, average $379, opener and labor included. HomeGuide (Jul 10, 2025): $300–$900, average $600. Our repair estimator prices a new opener installed at $250–$550.
Garage door opener cost by drive type
| Item | Typical range | Notes |
|---|---|---|
| Opener installed — typical job (Angi) | $218 – $540 | Unit plus labor. Angi's national average is $379 (Aug 3, 2026). |
| Opener installed — HomeGuide range | $300 – $900 | HomeGuide's average is $600, with a $220 minimum and $1,100 maximum (Jul 10, 2025). |
| Installation labor only (you supply the opener) | $150 – $400 | HomeGuide's labor range. Angi puts the rate at $65–$85 an hour for a 2–6 hour job. |
| Home Depot opener installation service | $178 – $238 | Home Depot's cost guide lists labor and installation at $178–$238; its install page says opener installation starts at $178, including removal and haul-away of the old opener (checked Oct 18, 2026). |
| Chain-drive opener (unit only) | $150 – $250 | Angi and HomeGuide agree on $150–$250. The cheapest and loudest type. |
| Belt-drive opener (unit only) | $160 – $350 | Angi's range; HomeGuide puts belt drives at $200–$450. Quieter than chain. |
| Screw-drive opener (unit only) | $150 – $300 | Angi's range; HomeGuide puts screw drives at $200–$500. |
| Direct-drive opener (unit only) | $280 – $500 | Angi's range; HomeGuide's is $300–$500. The motor travels along a stationary chain. |
| Wall-mount (jackshaft) opener (unit only) | $500 – $750 | Angi's range. Mounts beside the door on the torsion bar, freeing the ceiling. |
| Extension kit for doors over 8 ft tall | $45 – $85 | Angi's part price. HomeGuide says installers may charge an extra $50–$100 to install one. |
| Safety sensors (new pair) | $50 – $100 | Angi's add-on price; HomeGuide puts new sensors at $25–$100. New openers may not work with old sensors. |
| Battery backup | $50 – $150 | Angi. Keeps the opener running in a power outage. |
| Automatic lock | $100 – $300 | Angi. |
| Extra remote / wireless keypad | $20 – $70 | HomeGuide: remotes $20–$40 each, keypads $20–$70. |
| Running power to the garage (per linear foot) | $10 – $25 | HomeGuide. Only for garages with no outlet near the opener; an electrician does this part. |
What changes the price
Providers quote their own work — these are the factors that consistently move the number.
- Drive type: Angi puts chain-drive units at $150–$250, belt at $160–$350, screw at $150–$300, direct drive at $280–$500, and wall-mount jackshaft openers at $500–$750, before labor.
- Replacement vs. new install: swapping an existing opener reuses the outlet and mounting points, while a first install can need wiring at $10–$25 per linear foot (HomeGuide) plus new brackets and sensors.
- Labor: HomeGuide puts installation labor at $150–$400; Angi prices it at $65–$85 an hour for a 2–6 hour job.
- Door weight and height: heavier doors need more horsepower, and doors over 8 feet tall need a $45–$85 extension kit (Angi), plus $50–$100 to install it (HomeGuide).
- Smart and security features: Angi puts feature-loaded units at $400–$600, with battery backup at $50–$150 and an automatic lock at $100–$300.
- Number of doors: two single doors need two openers, so Angi notes the labor doubles.
- Where you buy: Home Depot's install service starts at $178 when you buy the opener there (checked Oct 18, 2026); local installers bundle the unit and labor into one price.
Garage door opener cost by type: chain, belt, screw, and wall-mount
Angi's 2026 unit prices (updated Aug 3, 2026): chain drive $150–$250, belt drive $160–$350, screw drive $150–$300, direct drive $280–$500, and wall-mount jackshaft $500–$750. HomeGuide's unit prices (Jul 10, 2025) are chain $150–$250, belt $200–$450, screw $200–$500, and direct drive $300–$500. Add labor of $150–$400 (HomeGuide) for the installed price.
Chain drives are the budget pick but the noisiest. Belt drives use a steel-reinforced rubber belt and run much quieter, which matters when the garage sits under a bedroom. Screw drives turn a threaded rod. Direct-drive units move the motor itself along a stationary chain and are nearly silent. Wall-mount (jackshaft) openers mount beside the door and turn the torsion bar directly, so they free the ceiling for storage and are a common pick for heavy doors.
Horsepower is a separate choice from drive type. Angi says a 1/2 HP opener can cost as little as $100, while a 2 HP unit runs $300–$400. The opener HP selector at the top of this page matches horsepower to your door's estimated weight, so you don't pay for power you don't need.
Labor-only vs. installed: what you pay if you buy the opener yourself
If you already have the opener, you're paying for labor only: HomeGuide puts installation labor at $150 to $400. Angi prices it by the hour at $65 to $85 for a 2- to 6-hour job. ESTIMATE: that works out to $130–$510 for labor ($65 × 2 hours = $130 at the low end; $85 × 6 hours = $510 at the high end).
Buying the unit through the installer costs more upfront but puts one company on the hook for both the part and the work. Ask whether the quote includes removing the old opener, new safety sensors, and an extension kit if your door is taller than 7 to 8 feet. HomeGuide notes that some estimates leave out sensors, and that new openers may not work with existing ones.
Home Depot and Lowe's garage door opener installation cost
The Home Depot's garage door opener install page says installation starts at $178 and includes removal and haul-away of the old opener and other materials (checked Oct 18, 2026). Its install service also covers an extension kit if needed and a door inspection and adjustment. Its cost guide lists openers at $159–$499 and labor and installation at $178–$238. We couldn't find a current $99 opener-install offer on homedepot.com on Oct 18, 2026. Retail install prices and promotions change, so check the install price on the product page before you buy.
Lowe's doesn't publish a flat national price for opener installation on its installation page (checked Oct 18, 2026). You request a free consultation, and an independent installer quotes product and labor; Lowe's says the work carries a one-year labor warranty. Home Depot's install service also comes with a 1-year labor warranty. Compare either quote against a local installer's price for the same opener, installed.
Replacing an old garage door opener vs. a new installation
Replacing an existing opener is the cheaper job. HomeGuide says most companies include removing the old opener in the labor, though some charge extra; Angi suggests budgeting about an extra half-hour of labor for removal. ESTIMATE: at Angi's $65–$85 hourly rate, that's roughly $33–$43 (0.5 hours × $65 = $32.50; 0.5 hours × $85 = $42.50).
A first-time install takes longer, up to 6 hours according to HomeGuide and Angi, because the installer mounts the brackets, rail, and sensors from scratch. If there's no outlet near the opener, HomeGuide puts running electricity to the garage at $10 to $25 per linear foot, done by an electrician. If the door itself is heavy or hard to lift by hand, have the springs checked first: an opener is meant to move a balanced door, not lift a dead weight.
Smart garage door openers: what WiFi, cameras, and battery backup add
Angi puts openers loaded with features such as WiFi, LED lights, backup batteries, built-in cameras, and wireless keypads at $400 to $600, and a wall-mount unit with ultra-quiet operation and smart features like automatic locking at the same $400 to $600. Home Depot says most of the openers it sells are smart, with app control and alerts.
Some smart features carry a running cost. Angi notes that mobile control or automatic opening and closing through the leading subscription service runs about $300 over ten years. Battery backup adds $50 to $150 and an automatic lock $100 to $300 (Angi). Extra remotes cost $20 to $40 each and keypads $20 to $70 (HomeGuide).
Garage door opener installation near me: getting a fair quote
HomeGuide recommends comparing at least three written estimates from installers who have been in business for 5+ years, and avoiding the cheapest bid. When you compare, make sure each quote names the opener model, horsepower, and drive type, and says whether removal, sensors, and an extension kit are included.
Be wary of ads with a price that looks too good to be true; a real opener quote names the unit and the labor before work starts. Request a quote below and we'll route it to an independent local installer.
How we built these numbers
The short version. Every price on this page comes from a published, cited source. When no source publishes a figure we need, we make an estimate, label it as an estimate, and show how we got it. These are planning ranges, not quotes. This page is published by Cornelia Cove LLC.
How each range was built:
Headline range ($218–$540) and average ($379). Copied as published from Angi's garage door opener installation cost guide (updated Aug 3, 2026). The low and high are Angi's typical range; the average is Angi's published average.
HomeGuide range ($300–$900, average $600), unit ($150–$500) and labor ($150–$400). As published by HomeGuide's garage door opener installation cost guide (Jul 10, 2025), along with its unit prices by type, remotes, keypads, sensors, extension-kit install fee, and the $10–$25 per foot wiring figure.
Unit prices by type (chain, belt, screw, direct drive, jackshaft), hourly labor, horsepower, smart features, and add-ons. As published by Angi (Aug 3, 2026). Angi is the only source here that prices jackshaft (wall-mount) openers.
Big-box prices. Home Depot's 'starting at $178' and its $159–$499 opener and $178–$238 labor figures are from homedepot.com's garage door opener installation page and its garage door cost guide, both undated and checked Oct 18, 2026. Lowe's installation page, checked the same day, publishes no flat price.
Our tools. Our repair cost estimator uses $250–$550 for a new opener installed, which sits inside Angi's range. Our new garage door calculator adds $400–$800 for a belt-drive WiFi opener installed with a new door, inside HomeGuide's $300–$900.
Date window. Source pages were published or updated between Jul 10, 2025 and Aug 3, 2026, and all were accessed Oct 18, 2026.
Estimates on this page (labeled where they appear): Labor by the hour ($130–$510) = Angi's $65–$85 per hour × 2–6 hours, low × low and high × high. Old-opener removal (about $33–$43) = 0.5 hours × Angi's $65–$85 hourly rate.
How we choose figures: As published. We copy a source's range exactly. We don't round, blend or adjust for inflation. When sources disagree, we show both and name each one. Same numbers everywhere: this page and our opener and repair tools use the same figures.
Limits. These ranges are national, not local, and prices in your area can fall outside them. They aren't quotes, because we don't survey installers. Big-box prices and promotions change often; check the retailer's site before you buy.
Reusing this data. The cost tables on this page are licensed CC BY 4.0 (https://creativecommons.org/licenses/by/4.0/). You can reuse them with attribution and a link back to this page. Suggested credit: Source: Garage Door Repair Network, Garage Door Opener Installation Cost (Cornelia Cove LLC), https://garagedoorrepairnetwork.com/cost/garage-door-opener-installation-cost
Corrections. Spot a wrong or outdated figure? Email partners@corneliacove.com. We check reported errors against the cited source, then update the page and its review date.
Last updated: October 2026. We refresh these tables at least once a year.
Repair or replace?
Opener repairs (sensors, gears, logic boards) run $150–$400 in our repair estimator and make sense on younger units. HomeGuide says openers last 10 to 15 years. Past that age, a replacement at $218–$540 installed (Angi) often beats repairing a worn unit, and you get current safety features and a fresh warranty.
A failed motor is the usual tipping point. HomeGuide puts a motor replacement at $300–$800 including labor, depending on the opener type, which is as much as or more than a new opener. If the opener flashes an error code, the blink-code decoder linked below translates it before you decide.
Frequently Asked Questions
How much does it cost to install a garage door opener?
Most homeowners pay $218–$540 with the opener included, averaging $379 (Angi, Aug 2026). HomeGuide's range is $300–$900, averaging $600. Chain drives are the cheapest; wall-mount jackshaft openers cost the most, at $500–$750 for the unit alone (Angi).
How much is labor to install a garage door opener?
HomeGuide puts labor at $150–$400. Angi prices it at $65–$85 an hour for a 2- to 6-hour job. Replacing an existing opener takes less time than a first-time install, which needs brackets, a rail, sensors, and sometimes wiring.
How much does Home Depot charge to install a garage door opener?
Home Depot's install page says opener installation starts at $178, including removal and haul-away of the old opener, and its cost guide lists labor and installation at $178–$238 (checked Oct 18, 2026). We couldn't find a current $99 install offer on homedepot.com that day; retail promotions change, so check the product page.
How much does Lowe's charge to install a garage door opener?
Lowe's doesn't publish a flat national price on its installation page (checked Oct 18, 2026). You book a free consultation and an independent installer quotes the opener and labor, with a one-year labor warranty. Compare that quote with a local installer's price for the same opener.
Is a belt drive or chain drive opener better?
For an attached garage or one under a bedroom, a belt drive is worth the extra cost because it's much quieter. Angi puts belt drives at $160–$350 and chain drives at $150–$250 for the unit. For a detached garage, a chain drive is cheaper and works fine.
What is a wall-mount (jackshaft) garage door opener?
A jackshaft opener mounts on the wall beside the door and turns the torsion bar directly, so there's no rail across the ceiling. It's quiet and frees overhead space. Angi puts the unit at $500–$750, making it the most expensive opener type.
How long does it take to install a garage door opener?
Two to six hours, according to both HomeGuide and Angi. A straight swap of an old opener is at the short end; a first-time install with new brackets, sensors, and wiring takes longer.
How long do garage door openers last?
HomeGuide says 10 to 15 years on average, with most openers rated for about 10,000 open-and-close cycles. Door weight, horsepower, and how often you use the door all affect lifespan.
Estimates only — independent local providers quote their own pricing. Data last reviewed 2026-10.
Sources
- Angi — How Much Does Garage Door Opener Installation Cost? (updated Aug 3, 2026) (third-party estimate)
- HomeGuide — Garage Door Opener Installation Cost (Jul 10, 2025) (third-party estimate)
- The Home Depot — Garage Door & Opener Installation (checked Oct 18, 2026)
- The Home Depot — Garage Door Installation Cost Guide (checked Oct 18, 2026)
- Lowe's — Garage Door & Garage Door Opener Installation (checked Oct 18, 2026)
Related services
Related guides
- Garage Door Repair Cost in 2026: How Much to Fix a Garage Door
- Garage Door Replacement Cost in 2026: New Garage Door Installation Prices
- Garage Door Spring Replacement Cost in 2026: Torsion and Extension Spring Prices
- Garage Door Won't Open: What to Do Right Now
- Garage Door Won't Close: What to Do Right Now
Free tools for this job
Garage Door Opener Blink Code Decoder
LiftMaster arrows flashing? Genie LED blinking red? Look up the flash pattern to see what your opener is telling you — and whether it's a DIY fix.
Use the free tool →Garage Door Repair Cost Estimator
Estimate what your garage door repair should cost — springs, cables, openers, panels, and off-track doors, scheduled or emergency.
Use the free tool →Garage Door Size & Clearance Planner
Enter your vehicles and a few measurements to get a standard-vs-custom size call and a spring/track recommendation for your headroom.
Use the free tool →Areas We Serve
Prefer to just talk to someone?
Send the short form — we'll route you to an independent local pro.